Application features
The fully automatic servo negative pressure forming and cutting integrated machine saves labor and electricity by 1/3. When the vacuum forming mold is produced for the second time, the parameters saved in the previous production can be retrieved to quickly produce products, reduce the scrap rate, and minimize various manual contact and inefficiency problems caused by secondary cutting. Now, we are using the new generation SFC72/85 negative pressure forming and cutting integrated machine to solve the problem of high-difficulty vacuum forming products. Improve the quality and efficiency of products to make them more perfect.
Application: It is suitable for the molding of plastic sheets such as PS, PP, PVC, PET, HPS, etc. It is used to process highly transparent, round, square, irregular and other products, and to produce various boxes, plates, trays, bowls, LIDS, industrial packaging, food packaging, cosmetic packaging and other packaging plastic products.
Technical parameters of SFC72/85 Negative Pressure Forming and Cutting Integrated Machine
|
forming length
|
《850mm
|
|
sheet materials
|
PET、PP、PS、PVC、ABS等
|
|
forming width
|
420~720mm
|
|
maximum power for loading into the furnace
|
48*650w/31kw/1段加热
|
|
maximum forming height
|
150mm
|
|
maximum power of the furnace
|
24*800w/19kw/1 heating stage
|
|
maximum forming depth
|
120 mm
|
|
power of the chiller
|
3 horsepower
|
|
width of the sheet material
|
460~760mm
|
|
power of the vacuum pump
|
150m3
|
|
sheet materialthick
|
2.0mm
|
|
vacuum cylinder volume
|
0.5 m3
|
|
temperature control system
|
Aoyi Temperature Control integrated computer module
|
|
power supply
|
380V/220V/50HZ/
three-phase five-wire system
|
|
power consumption
|
78 sets of the Tianbao energy-saving stainless steel electric furnace
|
|
Machine power
|
approximately 30kw per hour
|
|
control system
|
Delta DVP/ 10-inch screen
|
|
gas consumption
|
6.5kg/cm1000-1500l/Min
|
|
motion system
|
Xinjie system
|
|
maximum production speed
|
20 molds per minute(depending on the thickness of the material)
|
|
upper and lower drive of molding
|
Xinjie servo
|
|
installed capacity
|
100KVA
|
|
cutting drive
|
Xinjie servo
|
|
mechanical dimensions
|
L9200×W2850×H2660mm
|
|
cutting pressure
|
80 tons
|
|
mechanical weight
|
approximately92000kg
|
|
Products
