The two-axis high-speed slitting machine inherits the excellent advantages of the ordinary high-speed slitting machine, and integrates the improved model with the requirements of customers for production efficiency, and has its own new characteristics:
1. Winding is divided into upper double winding and single winding design. The upper winding consists of two groups of winding, the lower winding consists of one group of winding, the upper winding is suitable for tube diameter of Φ12.7mm--Φ38.1mm,
The winding diameter is less than 300mm, and the down-winding is suitable for the tube diameter of Φ38.1mm--Φ76mm, and the winding diameter is above 300mm.
2. Double axis design is adopted for winding up. After the completion of the winding of one shaft, the other shaft enters the winding state, and the operator can load and unload the products of the previous shaft and conduct subsequent processing without delaying the operation of the machine.
3, the machine adopts programmable controller with human-machine interface to control, in order to improve the accuracy of colleagues to ensure the stability of the machine operation.
4, the transmission system adopts synchronous belt transmission. Not only improve the transmission accuracy, ensure the accuracy of the material, but also effectively reduce the noise of the machine operation, optimize the working environment.
5, the machine adopts double wall board design, and the operation surface wall board is processed as one, to prevent the tilt of the machine roller due to long-term use, effectively increase the service life of the machine, ensure the accuracy of the machine, and improve the quality of the machine.
Main Technical Parameters:
Model
|
LX-320
|
Max.speed
|
180m/min
|
Knife
|
8 pcs
|
Max.Unwinder Dia
|
Φ640mm
|
Feeding Width
|
20~50mm
|
Rewinder Dia
|
Uper ΦΘ640mm,down Θ300Θmm
|
Rewinder paper inter dDia
|
0.5”、1”、1.5”、3” 纸芯
|
Dimension(LxWxH)
|
1550mm×860mm×1150mm
|
Voltage
|
220V±10% 50Hz±±5%
|
|