Machinery Overview
1. Compared with standard machine A, the machine shortens in length and simplifies in structure.
2. There are two main configurations:
Model B: Adopts PLC as main control, one set YASKAWA servo for deal-length and pulling material,
930 touch screen and one set mechanical ultrasonic for down press and one set pneumatic ultrasonic.
Model C: MIC as main control as main control, 5.7 inches touch screen and two sets mechanical ultrasonics which installed at the table-board.
3. The two models which can produce the pockets with six small or less than six pockets in a sheet, and they are the first selection for the customer who has purchased the standard one.
4. The machine without puncher, if you need, please tell us when order.
Parameter
|
Main Technical Parameter
|
XCJ-500B
|
|
Max. Width Of Pocket Making
|
370mm(17.7")
|
|
Max. Length Of Pocket Making
|
50～350mm(2"～19.7")
|
|
Max. Film Thickness
|
0.035mm～0.12mm
|
|
Max. Speed Of The Machine
|
150pcs/min
|
|
Power Required
|
12kw
|
|
Overall Dimensions Of The Equipment
|
7000×1400×2000mm
|
|
Products
