The main technical parameters
|
Machine width
|
1.0M 1.3M 1.6M
|
|
Cutting accuracy
|
±0.1mm
|
|
Maximum roll diameter cut
|
250mm
|
|
Cutting the outer diameter of the tube heart
|
1"- 3"
|
|
The minimum width of cut volume
|
3mm
|
Uses:
Uniaxial automatic cutting machine FR-1300D Use for BOPP / PVC / PE / Masking / domestic and imported double-sided tape / kraft tape / conductive foam rubber / cloth / industrial tape / film slitting of protection .
Features:
A host transmission parts : the use of AC motor with inverter drive as cutting roll material , steady and rapid acceleration and deceleration . 2 central control unit : central control to use the program , coaxial can be set automatically converted dozen cut -off , so that unattended operation automatically.
3 Control panel parts: LCD operator interface uses Willen 5.7-inch touch screen , you can set a variety of operating conditions and cut volumes mounted directly on the screen condition .
4 motor control system : central control system is PLC controller , coaxial variety of sizes that can be set , the computer automatically adjusts the cut at the cutting width .
5 Cut roll positioning system : Mitsubishi servo motor control, precision linear bearings dimension positioning and use of linear slide bearing knife , smooth precise positioning operation .
6 feed positioning system : servo motor control feed manner, anthropomorphic overtaken by the speed of the single -stage intake knife roll , increase efficiency and get the best quality.
7 round knife angle adjustment : Use manual knife round the corner , because different materials to make changes at different angles (angle adjustment range of ± 8 °) when the cutting plane is poor , can be directly converted cutting angle can reduce the number of tool changes .
|
Products
