Description: 
　　Electromagnetic induction aluminum foil filling piece is applied to sealing case of different materials like PE、PET、PS、APS、PP and glass bottle etc. It is widely used on packaging of cosmetic、medicine、foodstuff、inebriant、 pesticide、engine oil bottle、base chemical and etc. It holds functions of anti-leakage, guarding against theft, anti-fake, anti-deteriorate and the function of prolong guarantee period.

1.Laminating imported cardboard and aluminum foil together by special technics.
2.Cutting the laminated aluminum foil filling piece into roundness or other form according to requirement.
3.Embed aluminum foil filling piece into bottle cap and keep the aluminum foil exerted, then clamp down on bottle body to wind up the cap. Through electromagnetic induction capper induction heating of part, aluminum foil and bottle body splice into one, with firm melting seal.

1.First unwinder, second unwinder and rewinder all adopt air-expansion shaft.
2.First unwinder is equipped with photoelectric correction device.
3.The tension of first unwinder, second unwinder and rewinder is respectively controlled by its own magnetic powder clutch.
4. Waxing by mesh roller; scraper imported from Switzerland; the scraper will oscillate when waxing.
5. Two layers of stainless steel wax plate, is heated by heat-conducting oil; the temperature can be regulated.
6. Main motor adopts frequency conversion adjusting speed, Panasonic frequency converter.
7. The inner of laminating hot-roller is heated by heat-conducting oil, uniform temperature and energy saving.
8. Glue spreading pressure roller and laminating pressure roller adopt pneumatic press-adding machanism, whose pressure can be regulated.
9. The total length of oven is 3.5m. The inner guiding rollers are shaped in arch, driven by chain initiatively.
10. The oven is heated by electricity; it is devided into two sections of independent temperature control; the temperature in each section can be regulated independently.

Main technical parameters: