Main characteristic
1. The  surface of glue melting oven is coated  with the Teflon antisticking layer, efficacious prevent the hot melt adhesive against carbonization,to insure the adhesive in the beststate and reduce blockage.
2. The gear pump adopts frequency conversion which  accurate control adhesive capacity output.
3. Filter of pump can eliminate impurity to prevent the spray head from blockage.
4. Jyp130 hot melt coating machine adopts intelligent PiD temperature control system.
5. The system with temperature protection function can prevent the device from damage.

Range of application
Model JYP130Hot Melt Adhesive spraying Machine is suitable for producing Seal and canlk of refrigerator, filter, car lamp,Non-woven fabric.It can work with  coating machine.

technical parameters：

Model

JYP130

Lay incapacity

200kg

Spraying speed

130kg/h

Power

22kw

Range of temperature control

50-250℃

length

11000mm

width

820mm

height

1250mm

This data is measured by EVA glue with the stickness of 3000CPS.