|
|
 Products |
|
| Current product: Laminating Machine(GF-G) |
|
|
Fit range and main features：
The machine is applied to laminating various roll materials like plastic film(BOPP,PET,CPE,PVC,PE,CPP etc.), paper, aluminum foil and etc. in tow-layer or multi-layer manner. The unwinding and rewinding equipments adopt independent dual arm and dual working position electromotion retroflexion stander. The machine adopts automatic dual photoelectricity tracking rectification system, gas sensing rectification system, automatic tension control system, and independent constant temperature hot air circulation drying system., and air cylinder top open type oven. It adopts mesh roller for glue spreading. Glue spreading rubber roller and laminating rubber roller are controlled pneumatically. The machine holds the characteristics of high laminating speed, lower noise, lower energy consumption and lower air pollution etc.
1.Both unwinding and rewinding equipments adopt air-expansion shaft to bear roll materials, assuring fast replacement, even supporting force and accurate centering.
2.Both the first and the second unwinding equipments adopt automatic dual photoelectricity tracking rectification system, assuring the unwinding edge smooth and tidy.
3.The tension of the first unwinding, the second unwinding and the rewinding is controlled independently by automatic tension control system respectively.
4.Quantitative transferred glue spreading by mesh roller; pneumatic pressing rubber roller; pneumatic back pressing doctor; independent motor controlling doctor’s horizontal movement.
5.The heat conducting oil in the laminating steel roller is heated up to make the roller surface heat evenly and save power as well.
6.Glue spreading rubber roller and laminating rubber roller pressurize pneumatically.
7.The machine adopts dual-frequency conversion timing technology and Japan panasonic transducer, assuring every part drives synchronously.
8.Air cylinder top open type oven, with the length of 8 m, is divided into four segments. Open and close are controlled by air cylinder. Inside oven, bearing rollers are shaped in arch. There are walkway and guardrail at one side of the oven.
9.The temperature is independently controllable in the four segments of the oven respectively. External heater is heated by electricity. The blower inbreathes hot air into the oven.
10.Inside, the oven adopts hot air circulation system and saves the energy. The materials is stainless steel. At the entrance of oven, the exhaust air equipment discharges the volatilizable solvent in order to avoid exhaust air participating in the second circulation and ensure safety.
11.The entrance of the oven holds pneumatic sensor system, which automatically controls the tension of the film in the oven. 12.Before rewinding, it adopts E.P.C. air sensing rectification system.
13.All bearing rollers adopt the highly hardened aluminum alloy rollers imported from China Taiwan, static and dynamic equilibrium treated.
Main technical parameters：
|
Type of machine:
|
GF600G
|
GF800G
|
GF1000G
|
GF1200G
|
|
Max. laminating speed:
|
130m/min
|
130m/min
|
130m/min
|
130m/min
|
|
Laminating layer:
|
2layers/time
|
2layers/time
|
2layers/time
|
2layers/time
|
|
Max. laminating width:
|
600mm
|
800mm
|
1000mm
|
1200mm
|
|
Total power:
|
40kw
|
42kw
|
44kw
|
54kw
|
|
Machine weight:
|
4500kg
|
5000kg
|
5500kg
|
6000kg
|
|
Overall dimension:
|
10000×1530×3500mm
|
10000×1730×3500mm
|
10000×1930×3500mm
|
10000×2130×3500mm
|
|
|
|
|
| |
